Technical glues and paints
Showing 13–24 of 36 resultsSorted by popularity
-
Glues and epoxyTransparent two-component epoxy adhesive 2 tubes + gun + 4 nozzles
2-tube clear epoxy kit:
- Supplied with an application gun
- 4 mixing nozzles
- Two-component ultra-strong adhesive
- Transparent colour
- High chemical resistance
- Volume: 50ml
-
Dries in 5 minutes
-
Additives and greasesLoctite LB 771 High temperature nickel rust proof grease 1315°C 226gr anti seize
Loctite LB 771 high temperature grease:
- Resistant up to 1315°C
- Anti Seize
- Nickel and graphite based
- Multi-material compatibility
- Anti-seize for shafts, bores and threads.
- Facilitates assembly of stainless steel threads
- Highly resistant to environments and chemicals
- High anti-rust power
- Pot of 226 gr.
- Official Henkel France supply
-
Cap with application brush
-
Glues and epoxyTwo-component epoxy adhesive gun with plunger ratio 2/1 and 1/1
Epoxy adhesive application gun:
- High quality construction
- 2/1 plunger (also works for 1/1)
- Metal grip
- Resistant to chemicals
-
For two-component epoxy adhesives
-
High temperature paintHigh-temperature red paint for brake callipers 400ml aerosol can
Red high-temperature paint:
- Crystallizes with heat
- Maximum temperature: +300°C
- Complete drying time: 24H
- Final drying with the first heating cycle
- Volume: 400ml
- French brand Vision color
-
Durable hold over time
-
Glues and epoxy5 Nozzles 10:1 for two-component epoxy for stone and minerals
Two-component nozzles:
- Mixing ratio 10:1
- Mixing tip for adhesive and hardener
- Single use
- Output diameter 2mm
-
Sold in packs of 5
-
Glues and epoxyBlack two-component epoxy adhesive fast-drying 5 min 50ml
Black epoxy adhesive:
- Strong two-component adhesive
- Black colour
- High chemical resistance
- Volume: 50ml
-
Compatible with metals and plastics
-
Additives and greasesLoctite LB 8009 High temperature nickel rust proof grease 1315°C 510gr anti seize
Loctite LB 8009 high temperature grease:
- Resistant up to 1315°C
- Anti-Seize = Anti-Seize
- Nickel and graphite based
- Multi-material compatibility
- Anti-seize for shafts, bores and threads.
- Facilitates assembly of stainless steel threads
- Highly resistant to environments and chemicals
- High anti-rust power
- 510 gr. jar
- Official Henkel France supply
-
Cap with application brush
-
High temperature paintYellow high-temperature paint for brake calipers 400ml aerosol can
Yellow high-temperature paint:
- Crystallizes with heat
- Maximum temperature: +300°C
- Complete drying time: 24H
- Final drying with the first heating cycle
- Volume: 400ml
- French brand Vision color
-
Durable hold over time
1 review -
Glues and epoxyStrong transparent underwater glue 120ml for swimming pools and aquariums
Aquatic underwater glue:
- Colour: transparent
- Optimum drying time: 1 minute
- Temperature range: 20°C to +55°C
- High chemical resistance
-
Underwater drying
-
Additives and greasesValve honing tool with suction cup + Honing compound for 80 and 180 grain valves
Lapping paste for valves + Quick lapping tool:
- Several sizes of suction cup to adapt to different valve sizes.
- Metal pot with 2 different grits
- 80 grit etching
- 180 grain finish
- Suction cup holder to turn with a drill
-
Clean your valves after using lapping paste
-
Glues and epoxyGlue for aluminium, magnesium and metal two-component epoxy adhesive 50ml application gun+ 5 nozzles
Two-component aluminium repair adhesive kit:
- Application gun
- Volume: 50ml
- Colour: Grey
- Tensile strength: over 10kg/cm2
- Dry to the touch: 1 Hour
- Drying time at 50%: 25 minutes
- Optimum drying time: 24 hours
- Drying at room temperature
- Temperature range: -40°C to +200°C
- Supplied with 5 mixing nozzles
-
For Aluminium and Magnesium
-
Glues and epoxyAluminium glue for magnesium and metal epoxy adhesive two-component 50ml
Two-component aluminium repair adhesive:
- Volume: 50ml
- Colour: Grey
- Tensile strength: over 10kg/cm2
- Dry to the touch: 1 Hour
- Drying time at 50%: 25 minutes
- Optimum drying time: 24 hours
- Drying at room temperature
- Temperature range: -40°C to +200°C
-
For Aluminium and Magnesium
