Tools
Showing 13–24 of 31 resultsSorted by popularity
-
Drills, Taps and InsertsAssortment of 3 tungsten carbide step drills
3 Tungsten carbide step drills:
- Suitable for metals
- Drilling, chamfering, deburring
(0 reviews) -
Paint gunDA PRO Blue paint spray gun 1.3mm nozzle for paints and varnishes
DA Pro Blue paint spray gun, for painters and bodywork specialists.
- Operating pressure: 1 to 10 bar
- Adjustable paint flow
- Adjustable air flow from 190 to 250ml/minute
- Adjustable output beam opening from 210 to 400mm
- Fully solvent cleanable
- 1.7mm nozzle
- Jar capacity: 600ml
- 1/4″ air hose connection
- Excellent results with water-based paints and direct glosses.
- Perfect finish with varnishes.
- Fine atomisation.
- 1.3mm nozzle.
-
Suitable for solvent-based and solvent-free paints.
(0 reviews) -
Drills, Taps and InsertsDash 6 tap + die 9/16-18 UNF thread
Dash 6 tap + die:
- Thread: 9/16-18 UNF
- In HSS treated steel
- Sold per tap + die set
-
Thread: DASH 6
(0 reviews) -
Drills, Taps and InsertsPliers for crimping inserts + 80 inserts M3 to M8
Pliers + crimping inserts:
- 80 inserts ranging from M3 to M8
- Crimping tool
-
Sold with accessories from M3 to M8
(0 reviews) -
Drills, Taps and InsertsAluminium crimp inserts, M3, M4, M5, M6, M8 Case 100 pcs.
Crimp inserts 100 pcs:
- M3: 30 pieces
- M4: 30 pieces
- M5: 20 pieces
- M6: 10 pieces
- M8: 10 pieces
-
To be crimped with special pliers
(0 reviews) -
Paint gunDA Pro professional paint spray gun 1.3mm HVLP nozzle with cup + accessories
DA pro Blue spray gun:
- Perfect finish with varnishes
- Fine atomisation
- 1.3 mm nozzle
- Suitable for solvent-based and solvent-free paints
-
Excellent results with water-based paints and direct glosses
(0 reviews) -
Drills, Taps and InsertsReinforced tungsten carbide drill bit, diameter 6mm
Reinforced depointer bit 6mm:
- Materials: Tungsten carbide
- External coating treated with braised carbide, very hard
-
Widely used in bodywork
(0 reviews) -
Drills, Taps and InsertsTap + M8 tungsten carbide reinforced dies 0.5 / 0.75 / 1.0 / 1.25 pitch
Reinforced M8 tap and die set:
- Tungsten carbide
- External coating treated with brazed carbide
- For threading steels with a grade greater than 65° (hard stainless steels, high-alloy steels)
- Sold individually (1 tap + 1 die)
-
Choice of pitches 0.5 / 0.75 / 1.0 / 1.25
(0 reviews)34,90€ Select options This product has multiple variants. The options may be chosen on the product page -
Drills, Taps and Inserts
Tap + M7 tungsten carbide reinforced dies 0.5 / 0.75 / 1.0 pitch
Reinforced M7 tap and die set:
- Tungsten carbide
- External coating treated with brazed carbide
- For threading steels with a grade greater than 65° (hard stainless steel, high-alloy steels)
- Sold individually (1 tap + 1 die)
-
Choice of pitches 0.5 / 0.75 / 1.0
(0 reviews)33,90€ Select options This product has multiple variants. The options may be chosen on the product page -
Drills, Taps and Inserts
Tap + M6 tungsten carbide reinforced dies 0.5 / 0.75 / 1.0 pitch
Reinforced M6 tap and die set:
- Made of tungsten carbide
- External coating treated with brazed carbide
- For threading steels with a grade greater than 65° (hard stainless steels, high-alloy steels)
- Sold individually (1 tap + 1 die)
-
Choice of pitches 0.5 / 0.75 / 1.0
(0 reviews)26,90€ Select options This product has multiple variants. The options may be chosen on the product page -
Drills, Taps and Inserts
Tap + die M5 tungsten carbide reinforced 0.5 / 0.8 pitch
Reinforced M5 tap and die set:
- Tungsten carbide
- External coating treated with brazed carbide
- For threading steels with a grade greater than 65° (hard stainless steel, high-alloy steels)
- Sold individually (1 tap + 1 die)
-
Choice of pitches 0.5 / 0.8
(0 reviews)24,90€ Select options This product has multiple variants. The options may be chosen on the product page -
Drills, Taps and Inserts
Dash 10 tap + die 7/8-14 UNF thread
Dash 10 tap + die:
- Thread: 7/8-14 UNF
- In HSS treated steel
- Sold per tap + die set
-
Thread: DASH 10
(0 reviews)
