1 way electrical connector 175 amps high power 600 volts bulkhead feedthrough Quick Disconnect

Code: 200amp-connector-1/voie

High-power bulkhead connector:

  • PA66 plastic body
  • Maximum voltage: 600 V
  • Suitable for 25mm2 wire
  • IP66 insulation
  • Double-stage cable gland
  • Quick disconnect
  • Integrated position switch
  • Maximum current: 175 amps

89,90

1 in stock

1 in stock

1 way high power electrical connector

quick disconnect 175 amps.


Pass power through your partitions, while retaining the advantage of a quick connection.

We recommend using these connectors to connect your appliances with a maximum current of 175 amps.

  • Supply power to a powerful electric motor
  • Connecting an electric car battery
  • To power a high-power electrical appliance (380V motor, industrial fan, etc.)

Brand: DISCOUNT AUTOSPORT

These connectors have a high quality design.

  • Safety clips with retaining handle
  • Insulated connections with cable gland
  • 2-stage cable gland with stainless steel rings
  • Sealing and insulation of the bulkhead screw plate
  • Robust end cap with M6 thread

But also in their manufacture:

  • PA66 plastic body
  • CNC machined stainless steel bushes and gland rings
  • Silver-plated copper alloy used for connections
  • Bulkhead support plate with lip seal.
  • Position switch (connected or not) integrated inside the connector, with 2 x 0.5mm2 wires for connection to the control panel.

Sensitive points have been given an innovative technical solution to prevent possible damage (overheating, connection breakage, locking of the quick-fit connector) .

Inner terminal to be crimped with 25mm2 wire

Fully waterproof, IP66 insulation class

Technical specifications:

  • Withstands high-pressure cleaning with Karcher
  • Maximum current: 175 amps
  • Maximum voltage: 600V
  • Insulation: IP66
  • Bulkhead mounting
  • Total assembled length: 125mm
  • Length / width of bulkhead plate: 65mm
  • Drilling for 4 plate supports: M6

Assembly process:

  1. Crimp your wire into the female terminal
  2. Push the terminal into the connector until the clips hold it in place (note that it cannot be removed once it has been clipped in).
  3. Add the flared ring to the screw socket
  4. Add the cable gland
  5. Add the ring with the seal
  6. Add the compression ring and tighten firmly

Note: When mounting in a marine environment, we recommend that you use WD-40 degreasing agent inside the connector to prevent corrosion and blocking of the quick connector.

Weight 0,3 kg

You may also like…