12 volt 200 amp battery bulkhead quick connector
Bulkhead quick connect + connector
Pass your power cables cleanly and reliably
These terminals completely eliminate worries about freiting and cable wear on bulkheads, andallow youto add power supplies by using several terminals on the terminal .
To be used with round terminals, with 8mm diameter.Supplied with a flexible gasket, to ensure a perfect bulkhead pass seal.
Technical specifications:
- Maximum amperage: 200 AMP
- Maximum voltage: 48 Volts
- Plastic material: PA 66
- Metal material: Bronze H62
Note: If you need a completely hermetic seal that is resistant to immersion in water or being washed down with a garden hose, you can install the bollard with motor sealant in addition to the seal on your partition.
| Weight | 0,2 kg |
|---|
You may also like…
-
ConnectorsBosch 6-way connector for motorised butterfly valve, BMW vanos
Bosch 6-way connector:
- Completely sealed
- For BOSCH electric accelerator
- For BMW Vanos
- Sold by Male – Female set
-
Crimp pins and seals supplied
(0 reviews) -
Hexagon LEDHexagon LED light Honeycomb ceiling lamp 2.4m x 4.8m 550W 6500k 230V detailing garage barber
Hexagon ceiling LED Light:
- Honeycomb style
- Easy assembly, plug and play
- Powerful lighting 550W
- Lenght: 4.8M
- Width: 2.4M
- Tension: 230V
- 66 000 Lumens
- Delivered with 2 spare led bars
- Color: 6500K cold white
- 10 year warranty
- Meets more than 10 European and international standards
- ISO 9001
- 3 days delivery in all Europe
-
Sell as a complete set, ready to assemble and use
(0 reviews) -
Connectors4-way connector 1J0 973 724 for Bosch ignition coil type Audi R8 TFSI, Porsche, VW
Connector for Bosch ignition coil:
- Fully waterproof
- 18+ amps / pins
- Bosch part number 1jo973724
-
Supplied with crimp pin, gaskets and protective boots
(0 reviews) -
ConnectorsBosch lsu 4.2 lambda sensor electrical connector
Connector for Bosch lsu 4.2 sensor:
- Sold with pins + seals + protective boots
- Fitted with a pin lock to hold the pins firmly in the connector
- For Bosch probe 0 258 007 057
(0 reviews)
Related products
-
High power connectorsHigh-power 600V 150 amp 1700 watt “Quick Disconnect” bulkhead connector
High-power bulkhead connector:
- CNC machined aluminium body, anodised
- Maximum voltage: 600 V
- Suitable for 20mm2 wire
- IP66 insulation
- Double stage cable gland
- Quick disconnect
-
Maximum current: 150 amps
(0 reviews) -
High power connectorsBulkhead feed-through Terminal – Negative power for 12 volt 200 amp electrical cable
High-power bulkhead bollard:
- Terminal block for high power electrical cables
- Frequently used for battery, starter and alternator cables
- Maximum voltage: 60V
- For agricultural machinery, cars and industry
-
Maximum amperage: 200 AMP
(0 reviews) -
High power connectorsHigh power 2 way 350 amp 600V fast battery connector Anderson power products
High-power 350 amp socket:
- Quick connection
- Maximum current: 350 amps
- Operating voltage: 600 volts
- Lugs designed to accept wire from 10 to 70mm2
- Total length: 180mm
- Width: 70mm
- Height: 35mm
- Widely used in caravanning, farming, industry and competition
- Silver-plated pure copper terminals
-
Sold in pairs: 2 connectors + 4 lugs, enough to make a complete connection
(0 reviews) -
High power connectorsElectrical connectors AMP superseal 2 ways series: 2.8 30 amps 24V
AMP superseal series 2.8 electrical connector:
- 2 Ways
- Completely sealed
- IP67 insulation
- Pins and seals supplied
- 30 amps / connection
- Suitable for 1.5 to 2.5mm2 wire
-
2.8 AMP series: 30 amps max.
(0 reviews)
