Circuit breaker engine stop button for Japanese motocross bikes Yamaha, Kawasaki, Suzuki, Honda
Circuit breaker button for Japanese motocross bikes
Engine stop button circuit breaker
Widely used on Japanese motocross bikes:
- Honda
- Kawasaki
- Yamaha
- Suzuki
Technical specifications:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 30 amps
- Momentary button
- Temperature range: -30°C to +90°C
- Diameter of standard motorbike handlebar clamp
- 30cm long harness with PVC sheath
| Weight | 0,1 kg |
|---|
You may also like…
-
Switches and switch pads12-volt 25-amp pull switch for cars and motorbikes
Pull switch:
- Operating voltage: 2 to 28 volts
- Self-locking in position
- Temperature range: -30°C to +90°C
- Installation hole diameter: 10mm
- Tightness: IP65
-
Maximum current: 25 amps
(0 reviews) -
ConnectorsCrimp terminal for connecting 2 wires, 200 pcs
Crimp terminal for connecting 2 electrical wires:
- Ideal for operations that are difficult to access.
- Made of brass for perfect conductivity.
- Sold in packs of 200 pcs.
- Crimp then solder for a perfect electrical connection
(0 reviews) -
Switches and switch pads12V 25 Amp “Toggle Switch” for electrical circuits
12V ON / OFF switch:
- Max voltage: 48 volts
- Silver inner contact
- Supplied with rubber cap
- 4.8mm flat terminals
-
Max current: 25 amps
(0 reviews) -
Switches and switch padsPush button starter switch 12V 50 amps, with soft rubber cap
Momentary push button:
- Widely used for starter and horn
- Contact type: Momentary
- Max current: 50 amps
- No need for relays
- IP55 sealing
- 2 screw terminals for connection
- NO contact: Normally open
(0 reviews)
Related products
-
Switches and switch padsPDM Switch Pad 6 round switches 25 amps 12 volts Discount Autosport 3D Printed
PDM-style 6-switch board:
- Switch Pad look
- 6-colour LED backlighting
- Up to 20 amps / switch
- Dimensions: 100 x 80 mm
- Rigid 3D printed board
- Temperature range: -20°C to +115°C
- Total weight: 110 grams
- Supplied with 2 screws with GOLD anodised washers + nuts and washers
-
Simple, reliable and cost-effective
(0 reviews) -
Switches and switch padsStarter switch and ignition key 12 volts 30 amps
Key-operated starter switch:
- Operating voltage: 2 to 28 volts
- Maximum acceptable current: 30 amps
- Self-locking in position
- Temperature range: -30°C to +90°C
- Installation hole diameter: 24mm
- Supplied with 2 keys
-
Connection with 4 terminals on back
(0 reviews) -
Switches and switch pads8 round switch panel PDM look “Switch Panel” 25 amps 12 volts Discount Autosport 3D Printed
8-switch board, PDM look:
- 7 fixed, 1 momentary
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 20 amps / switch
- Dimensions: 140 x 80 mm
- Rigid 3D printed circuit board
- Temperature range: -40°C to +90°C
- Total weight: 150 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
-
Simple, reliable and cost-effective
(0 reviews) -
Switches and switch padsPolarity reversing lever switch 6 terminals 12 volts
12-volt reversing switch:
- 3 positions ON – OFF – ON
- Self-holding in position
- Voltage range: 2 to 250 volts
- Maximum current: 15 amps
- Temperature range: -30°C to +90°C
- Installation hole diameter: 12mm
- Tightness: IP65
-
3 positions with dead centre
(0 reviews)
