For repainting

This very compact spray gun has been developed for spot repairs. Also known as “spot repair”.

Supplied with a 1mm nozzle, a cleaning brush, a universal connector and a free European connector.

125cc gravity cup.

Suitable for use with water-based and solvent-based paints.
Easy to clean. Operating pressure from 1 to 10 bar.

All our guns are designed with “HVLP” (High Volume Low Pressure) technology. This ensures high paint displacement with low air volume, guaranteeing a quality paint flow.

Our advice for setting up your spray gun

Basic settings for a spray gun:

• Firstly, set the inlet pressure of your spray gun with a pressure regulator.
• Set to 1.2 bars (pressure specifically adapted to our DA pro spray guns).
• Air flow valve wide open.
• Fan valve fully open, tighten a quarter turn, to adjust and clean spray edges.
• Fluid valve fully open, squeeze the trigger fully, tighten the fluid valve until you feel resistance against the trigger.
• From this position, tighten one turn.
• Your gun is now set to the “Wide open” position.

This is the basic setting for all products, after paints and varnishes.

Of course, it is essential to adjust your setting with the product.