Dash 4 tap + die 7/16-20 UNF thread
Tap + die for Dash 4 connector
Finish off with the adapters, thread your holes and install your Dash fittings on your installations.
Dash fittings are designed with an “American” thread.
It is not possible to use a metric tap and die to install, you must use the taps and dies pouçique.
This is an “American” or “pouçque” thread.
Drill and thread your support with this tap specially designed for.
Thread: 7/16-20 UNF = Dash 4
Tip: For a perfect seal, we recommend applying LOCTITE 577 thread sealant.
| Weight | 0,2 kg |
|---|
You may also like…
-
AN FittingsDash 4 black nylon + nitrile multi-fuel hose 1 metre long
Dash 4 black nylon hose (AN4):
- Highly flexible installation
- Nitrile interior
- Black braided nylon exterior
- Inside diameter: 6.4mm.
- For an outstanding finish.
- Resistant to all types of hydrocarbons
- Price per metre 1 unit = 1 metre
- Adjust your desired length in your basket
(0 reviews)
Related products
-
Drills, Taps and InsertsTap + M4 tungsten carbide reinforced dies 0.5 / 0.7 pitch
Reinforced M4 tap and die set:
- Tungsten carbide
- External coating treated with brazed carbide
- For threading steels with a grade greater than 65° (hard stainless steels, high-alloy steels)
- Sold individually (1 tap + 1 die)
-
Choice of pitches 0.5 / 0.7
(0 reviews)21,90€ Select options This product has multiple variants. The options may be chosen on the product page -
Drills, Taps and InsertsSet of 10 broken nut extractors
Set of 10 broken nut extractors:
- For rounded and damaged nuts
- Hardened steel sockets
- Square dimension: 3/8
-
Can be used with standard sockets
(0 reviews) -
Drills, Taps and Inserts
Tap + M8 tungsten carbide reinforced dies 0.5 / 0.75 / 1.0 / 1.25 pitch
Reinforced M8 tap and die set:
- Tungsten carbide
- External coating treated with brazed carbide
- For threading steels with a grade greater than 65° (hard stainless steels, high-alloy steels)
- Sold individually (1 tap + 1 die)
-
Choice of pitches 0.5 / 0.75 / 1.0 / 1.25
(0 reviews)34,90€ Select options This product has multiple variants. The options may be chosen on the product page -
Drills, Taps and Inserts5 broken screw extractors 5 to 12mm “Pigtails
5 pigtail extractors:
- Diameter from 5 to 12mm
- In treated steel
-
Used to extract broken screws in a thread
(0 reviews)
