Engine start button for Japanese motocross bikes Yamaha, Kawasaki, Suzuki, Honda
Japanese motocross start button
Engine starter button
Widely used on Japanese motocross bikes:
- Honda
- Kawasaki
- Yamaha
- Suzuki
Technical specifications:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 20 amps
- Momentary button
- Temperature range: -30°C to +90°C
- Diameter of standard motorbike handlebar clamp
- 30cm long harness with PVC sheath
| Weight | 0,1 kg |
|---|
You may also like…
-
Switches and switch pads3D Print PDM-style 8-button switch plate + FIA-certified 180-amp electronic circuit breaker
PCB with 8 3D printed switches + electronic circuit breaker:
- 2 circuit breaker buttons +6 fixed switches +1 momentary switch
- FIA approved 180 amp circuit breaker
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 25 amps / switch
- Dimensions: 140 x 80 mm
- 5-axis machined plate in 6061 aluminium
- Temperature range: -40°C to +90°C
- Total weight: 200 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
- Supplied with full wiring diagram
- Simple, reliable and cost-effective
-
Equip your car like a factory WRC car or endurance prototype
(0 reviews) -
Switches and switch padsCircuit breaker engine stop button for Japanese motocross bikes Yamaha, Kawasaki, Suzuki, Honda
Motorbike circuit-breaker button:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 30 amps
- Momentary button
- Temperature range: -30°C to +90°C
- Diameter of standard motorbike handlebar clamp
- 30cm long harness with PVC sheath
- For Japanese motocross bikes
-
Yamaha, Kawasaki, Suzuki, Honda
(0 reviews) -
Switches and switch padsStarter switch and ignition key 12 volts 30 amps
Key-operated starter switch:
- Operating voltage: 2 to 28 volts
- Maximum acceptable current: 30 amps
- Self-locking in position
- Temperature range: -30°C to +90°C
- Installation hole diameter: 24mm
- Supplied with 2 keys
-
Connection with 4 terminals on back
(0 reviews) -
Switches and switch padsON / OFF switch and circuit breaker for motocross bikes
ON / OFF button for motorbike:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 30 amps
- Temperature range: -30°C to +90°C
- Diameter of standard motorbike handlebar clamp
- 50cm long harness with PVC sheath
-
Suitable for all motorbikes and scooters
(0 reviews)
Related products
-
Switches and switch padsPDM Gold style 8-button switch plate + FIA-certified 180 amp electronic circuit breaker
Machined aluminium 8-switch board + electronic circuit breaker:
- 2 circuit-breaker buttons +6 fixed switches +1 momentary switch
- FIA approved 180 amp circuit breaker
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 25 amps / switch
- Dimensions: 140 x 80 mm
- 5-axis machined plate in 6061 aluminium
- Temperature range: -40°C to +90°C
- Total weight: 200 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
- Supplied with full wiring diagram
- Simple, reliable and cost-effective
-
Equip your car like a factory WRC car or endurance prototype
(0 reviews) -
Switches and switch padsStarter board 6 switches 25 amps 12 volts Discount Autosport 3D Printed
6-switch starter board :
- 5 fixed, 1 momentary
- Simple and easy to install
- Up to 25 amps / switch
- 48 volts maximum
- Dimensions: 100 x 90 mm
- Rigid 3D printed circuit board
- Temperature range: -40°C to +90°C
- Total weight: 200 grams
- Tightness: IP64
- Supplied with 2 countersunk screws + nuts and washers
-
Simple, reliable and cost-effective
(0 reviews) -
Switches and switch pads8 round switch panel PDM look “Switch Panel” 25 amps 12 volts Discount Autosport 3D Printed
8-switch board, PDM look:
- 7 fixed, 1 momentary
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 20 amps / switch
- Dimensions: 140 x 80 mm
- Rigid 3D printed circuit board
- Temperature range: -40°C to +90°C
- Total weight: 150 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
-
Simple, reliable and cost-effective
(0 reviews) -
Switches and switch padsElectronic circuit breaker 180 amps 12 volts FIA approved waterproof IP67
180 amp electronic circuit breaker:
- Circuit breaker controlled by 2 switches
- Can be fitted in place of a conventional circuit breaker
- Simple, reliable installation (no on-board electronics)
- IP67 sealed switches
- IP67 sealing (Fully sealed)
- Operating voltage: 6 to 48 volts
- Brand: Discount Autosport
- Designed, developed and assembled in-house
- Wiring diagram included
-
Delivered as a complete kit
(0 reviews)
