Headlight, indicator and horn controls for motorbikes, scooters and electric scooters
Handlebar control Lights, horn and indicators
3-button control unit:
- Starter
- Headlights
- Turn signals (3 positions)
Technical specifications:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 20 amps
- Temperature range: -30°C to +90°C
- Diameter of standard motorbike handlebar clamp
- 30cm long harness with PVC sheath
| Weight | 0,1 kg |
|---|
You may also like…
-
Switches and switch padsPush button starter switch 12V 50 amps, with soft rubber cap
Momentary push button:
- Widely used for starter and horn
- Contact type: Momentary
- Max current: 50 amps
- No need for relays
- IP55 sealing
- 2 screw terminals for connection
- NO contact: Normally open
(0 reviews) -
Switches and switch padsSquare circuit breaker engine stop button for Japanese motocross bikes Yamaha, Kawasaki, Suzuki, Honda
Motorbike circuit-breaker button:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 30 amps
- Momentary button
- Temperature range: -30°C to +90°C
- Diameter of standard motorbike handlebar clamp
- 30cm long harness with PVC sheath
- For Japanese motocross bikes
-
Yamaha, Kawasaki, Suzuki, Honda
(0 reviews) -
Switches and switch padsCircuit breaker engine stop button for Japanese motocross bikes Yamaha, Kawasaki, Suzuki, Honda
Motorbike circuit-breaker button:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 30 amps
- Momentary button
- Temperature range: -30°C to +90°C
- Diameter of standard motorbike handlebar clamp
- 30cm long harness with PVC sheath
- For Japanese motocross bikes
-
Yamaha, Kawasaki, Suzuki, Honda
(0 reviews) -
Switches and switch padsON / OFF switch and circuit breaker for motocross bikes
ON / OFF button for motorbike:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 30 amps
- Temperature range: -30°C to +90°C
- Diameter of standard motorbike handlebar clamp
- 50cm long harness with PVC sheath
-
Suitable for all motorbikes and scooters
(0 reviews)
Related products
-
Switches and switch padsPower distribution box with 12 PDM 12 volt switch board for complete wiring harness
Power distribution box + 12-switch board
- Supplied with resettable circuit breaker
- Switch Panel” look like a PDM
- 6-colour LED backlighting
- Up to 30 amps / switch
- Temperature range: -40°C to +85°C
- Tightness: IP67
- Supplied with full wiring diagram
- Simple, reliable and cost-effective
-
Equip your car like a factory WRC car or endurance prototype
(0 reviews) -
Switches and switch padsPush button engine start LED starter switch 12V 50 amps
Engine Start button:
- Widely used for starter
- Contact type: Momentary
- Max current: 50 amps
- No need for relays
- IP55 sealing
- 2 screw terminals for connection
- NO contact: Normally open
-
LED backlight
(0 reviews) -
Switches and switch padsResistor for circuit breaker / battery 10 watts 3 ohm CNC machined body gold
Circuit breaker resistor:
- 3 ohm resistor
- 10 watts
- 6 to 24 volts
- CNC machined
- Gold anodised
- Drilled for mounting
- Lugs drilled to accept soldering wire
(0 reviews) -
Switches and switch padsButton 12V circuit breaker with cord for Karting Quad Snowmobiles and Outboard Boats
12V circuit breaker:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 20 amps
- Temperature range: -40°C to +90°C
- Installation hole diameter: 12mm
- Easy 2-wire connection
-
Secure your motorised vehicles
(0 reviews)
