High-power 2-way 70 amp 170V waterproof IP68 marine boat connector
The connector for marine equipment consuming up to 70 amperes
The connectors most commonly used to power light electric vehicles (go-karts, motorbikes).
But also for 4×4 winches and electric power steering pumps, which generally consume close to 50 amps.
Because they are IP68 waterproof, these connectors can also be used in environments that come into contact with water (marine, cleaning with a karcher).
Widely used in the boating and marine industries to connect high-power devices.
These connectors feature a high quality design:
- Female terminal with clamping ring
- Male terminal with solid 4.5 mm diameter ferrule
- PA66 plastic body (resistant up to 260° + chemicals)
- Removable terminal block (if terminals need to be removed)
- Slots for fixing with 4 screws
- Safety catch
- IP68 sealing
Technical specifications:
- Maximum acceptable voltage: 170 Volts
- Maximum current: 70 Amps
- Lugs designed to accept 4 to 6 mm2 wire
- Copper + silver plated terminals
- Operating range: -50°C to +140°C
- Insulated against water and external aggression IP68
Sold as a complete set: male + female connector, male + female cable lugs, 4 wire seals.
| Weight | 0,2 kg |
|---|
You may also like…
-
High power connectorsBulkhead + Positive power terminal for 200 amp 600V electrical cable
High-power bulkhead bollard:
- Terminal block for high power electrical cables
- Frequently used for battery, starter and alternator cables
- Maximum amperage: 200 AMP
- Maximum voltage: 600V
- For agricultural machinery, cars and industry
(0 reviews) -
Electric sleeveBlack heat-shrink tubing 2:1, diameter 3 to 25mm Length 5 metres
Black heat-shrink tubing:
- 2:1 diameter reduction
- Diameters from 2 to 25mm
- Electrical insulation
- Wear protection
- For automotive wiring harnesses
- For industrial electrical circuits
-
Sold in lengths of 5 metres
(0 reviews)4,29€ – 13,49€ Select options This product has multiple variants. The options may be chosen on the product page -
High power connectorsHigh power 2 way 120 amp 600V fast battery connector Anderson power products
High-power plug for starting:
- Quick connection
- Maximum current: 120 amps
- Crimp terminals with 25 to 35mm2 wire
- Widely used in competition, agriculture and industry
-
Sold in pairs: 2 connectors + 4 lugs, enough to make a complete connection
(0 reviews) -
ConnectorsCrimp terminal for connecting 2 wires, 200 pcs
Crimp terminal for connecting 2 electrical wires:
- Ideal for operations that are difficult to access.
- Made of brass for perfect conductivity.
- Sold in packs of 200 pcs.
- Crimp then solder for a perfect electrical connection
(0 reviews)
Related products
-
High power connectors2-way electrical connector 175 amps high power 600 volts bulkhead pass-through Quick Disconnect
High-power bulkhead connector:
- PA66 plastic body
- Maximum voltage: 600 V
- Suitable for 25mm2 wire
- IP66 insulation
- Double-stage cable gland
- Quick disconnect
- Integrated position switch
-
Maximum current: 175 amps
(0 reviews) -
High power connectors3-pin black agricultural plug male + female 12 and 24 volts
3-pin agricultural socket:
- From 12 to 24 volts
- 3-way
- 30+ amps per pin
- IP67 sealing range (dust and water)
-
Sold as a male + female set
(0 reviews) -
High power connectors12 volt 200 amp battery bulkhead quick connector
High-power bulkhead connector:
- For high power battery cables
- Frequently used for battery, starter and alternator cables
- Maximum voltage: 60V
- For agricultural, automotive and industrial machinery
-
Maximum amperage: 200 AMP
(0 reviews) -
High power connectorsElectrical connectors AMP superseal 2 ways series: 2.8 30 amps 24V
AMP superseal series 2.8 electrical connector:
- 2 Ways
- Completely sealed
- IP67 insulation
- Pins and seals supplied
- 30 amps / connection
- Suitable for 1.5 to 2.5mm2 wire
-
2.8 AMP series: 30 amps max.
(0 reviews)
