Bulkhead high-power electrical connector

150-amp quick-disconnect.

Pass power through your partitions, while retaining the advantage of a fast connection.

We recommend using these connectors to connect your appliances with a current of more than 140 amps, but not more than 150 amps.

• Bring the + Starter wire into an engine bay
• Connecting a battery quickly
• To power a high-power electrical appliance (380V motor, industrial fan, etc.)

Brand: DISCOUNT AUTOSPORT

These connectors have a high quality design.

• Insulated connections with cable gland
• 2-stage cable gland with stainless steel rings
• Sealing and insulation of the bulkhead screw plate
• Robust end cap with M8 thread for internal connection

But also in their manufacture:

• CNC machined aluminium body
• CNC machined stainless steel bushes and gland rings
• Silver-plated copper alloy used for connections
• Quick-disconnect sleeve with ball safety catch

Sensitive points have been given an innovative technical solution to prevent possible damage (overheating, connection breakage, locking of the quick-disconnect coupling)

Internal terminal to be crimped with 20mm2 wire

Fully waterproof, IP66 insulation class

Technical specifications:

• Withstands high-pressure cleaning with Karcher
• Maximum current: 150 amps
• Maximum voltage: 600V
• Insulation: IP66
• Bulkhead mounting
• Length / Width of plate: 30mm
• Drilling of 4 plate supports: 4.6mm
• Total length once assembled: 95mm

Assembly process:

1. Crimp your wire into the female terminal
2. Push the terminal into the connector until the clips hold it in place (note that it cannot be dismantled once it has been clipped in).
3. Add the flared ring to the screw socket
4. Add the cable gland
5. Add the ring with the seal
6. Add the compression ring and tighten firmly

Note: When mounting in a marine environment, we recommend that you use WD-40 degreasing agent inside the connector to prevent corrosion and blocking of the quick connector.