Push button engine start LED starter switch 12V 50 amps
Engine Start button:
- Widely used for starter
- Contact type: Momentary
- Max current: 50 amps
- No need for relays
- IP55 sealing
- 2 screw terminals for connection
- NO contact: Normally open
-
LED backlight
14,90€
2 in stock2 in stock
Starter push button
50-amp starter button, LED backlighting
Thanks to its oversized internal contact, there’s no need to use a relay in your electrical circuit.
This switch can handle currents of over 50 amps and 24 volts.
Fitted with 3 screw terminals for electrical connection.
Technical specifications:
- Maximum current: 50 amps
- Maximum voltage: 24 Volts
- Overall length: 55mm
- Body diameter: 29mm
- Hole diameter: 22mm
- IP55 sealing
- NO contact: Normally open
Widely used for the starter button due to its high current and momentary contact.
You may also like…
-
Switches and switch padsPush button starter switch 12V 50 amps, with soft rubber cap
Momentary push button:
- Widely used for starter and horn
- Contact type: Momentary
- Max current: 50 amps
- No need for relays
- IP55 sealing
- 2 screw terminals for connection
- NO contact: Normally open
1 review11,90€Add to basket
Delivery expected on Wednesday 23 April
If you order in the next 13 h and 46 min.
-
Switches and switch padsPDM Switch Pad 6 round switches 25 amps 12 volts Discount Autosport 3D Printed
PDM-style 6-switch board:
- Switch Pad look
- 6-colour LED backlighting
- Up to 20 amps / switch
- Dimensions: 100 x 80 mm
- Rigid 3D printed board
- Temperature range: -20°C to +115°C
- Total weight: 110 grams
- Supplied with 2 screws with GOLD anodised washers + nuts and washers
-
Simple, reliable and cost-effective
99,90€Add to basketDelivery expected on Wednesday 23 April
If you order in the next 13 h and 46 min.
-
Switches and switch pads4 switch starter plate 25 amps 12 volts Discount Autosport 3D Printed
4-switch starter board :
- 3 fixed, 1 momentary
- Simple and easy to install
- Up to 25 amps / switch
- 48 volts maximum
- Dimensions: 140 x 50 mm
- Rigid 3D printed circuit board
- Temperature range: -40°C to +90°C
- Total weight: 150 grams
- Tightness: IP64
- Supplied with 2 countersunk screws + nuts and washers
-
Simple, reliable and cost-effective
2 reviews29,90€Add to basketDelivery expected on Wednesday 23 April
If you order in the next 13 h and 46 min.
-
Switches and switch pads8 round switch panel PDM look “Switch Panel” 25 amps 12 volts Discount Autosport 3D Printed
8-switch board, PDM look:
- 7 fixed, 1 momentary
- Switch Panel” look like a PDM
- 4-colour LED backlighting
- Up to 20 amps / switch
- Dimensions: 140 x 80 mm
- Rigid 3D printed circuit board
- Temperature range: -40°C to +90°C
- Total weight: 150 grams
- Tightness: IP67
- Supplied with 2 countersunk screws + nuts and washers
-
Simple, reliable and cost-effective
124,90€Add to basketDelivery expected on Wednesday 23 April
If you order in the next 13 h and 46 min.
Reviews about product
-
Gregoire L.
Published on 18 November 2024 at 15h43 (Order date: 12 November 2024 at 14h51)perfect. no equivalent on the market
(Translated review)
Related products
-
Switches and switch padsButton 12V circuit breaker with cord for Karting Quad Snowmobiles and Outboard Boats
12V circuit breaker:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 20 amps
- Temperature range: -40°C to +90°C
- Installation hole diameter: 12mm
- Easy 2-wire connection
-
Secure your motorised vehicles
12,90€Add to basketDelivery expected on Wednesday 23 April
If you order in the next 13 h and 46 min.
-
Switches and switch padsResistor for circuit breaker / battery 10 watts 3 ohm CNC machined body gold
Circuit breaker resistor:
- 3 ohm resistor
- 10 watts
- 6 to 24 volts
- CNC machined
- Gold anodised
- Drilled for mounting
- Lugs drilled to accept soldering wire
2 reviews -
Switches and switch padsHeadlight, indicator and horn controls for motorbikes, scooters and electric scooters
Headlights, horn, indicators:
- Operating voltage: 0 to 28 volts
- Maximum acceptable current: 20 amps
- 3-position indicator button
- Momentary horn buttons
- Temperature range: -30°C to +90°C
- Diameter of standard motorbike handlebar clamp
- 30cm long harness with PVC sheath
-
For motorbikes, scooters and electric scooters
23,88€Add to basketDelivery expected on Wednesday 23 April
If you order in the next 13 h and 46 min.
-
Switches and switch padsFIA Cut Off switch electronic 180 amps 12 volts FIA approved waterproof IP67
180 amp electronic circuit breaker:
- Circuit breaker controlled by 2 switches
- Can be fitted in place of a conventional circuit breaker
- Simple, reliable installation (no on-board electronics)
- IP67 sealed switches
- IP67 sealing (Fully sealed)
- Operating voltage: 6 to 48 volts
- Brand: Discount Autosport
- Designed, developed and assembled in-house
- Wiring diagram included
-
Delivered as a complete kit
179,90€Add to basketDelivery expected on Wednesday 23 April
If you order in the next 13 h and 46 min.
