Tap + M4 tungsten carbide reinforced dies 0.5 / 0.7 pitch

Code: tap-die/M4

Reinforced M4 tap and die set:

Tungsten carbide
External coating treated with brazed carbide
For threading steels with a grade greater than 65° (hard stainless steels, high-alloy steels)
Sold individually (1 tap + 1 die)
Choice of pitches 0.5 / 0.7

21,90€

In Stock

Pas

Clear

Description
Additional information

Taps + dies in M4 diameters with 0.5 and 0.7 pitch

Tungsten carbide tap + die set for threading very hard steel, cast iron and high-alloy carbon steel types

External coating treated with brazed carbide

Technical specifications:

Materials: Tungsten carbide
For threading steels with a grade greater than 65° (hard stainless steels, high-alloy steels)
Good chip evacuation thanks to its point angle
External coating treated with brazed carbide, very hard

Widely used in industry and machining

Sold as a set of 1 tap + 1 die

Weight	N/A
Pas	M4 x 0.5, M4 x 0.7

You may also like…

Electric sleeve
Black heat-shrink tubing 2:1, diameter 3 to 25mm Length 5 metres
Black heat-shrink tubing:
- 2:1 diameter reduction
- Diameters from 2 to 25mm
- Electrical insulation
- Wear protection
- For automotive wiring harnesses
- For industrial electrical circuits
- Sold in lengths of 5 metres
(0 reviews)
4,29€ – 13,49€ Select options This product has multiple variants. The options may be chosen on the product page
Silicon and Multifuel hose
Flexible hose for cooling circuit, engine oil, LHM 10 to 19mm Length 1 metre
10 to 16mm flexible hose:
- Made of nitrile + fibre reinforcement
- 5 Internal diameters from 10 to 19mm
- Temperature range: -40°C to +140°C
- Maximum pressure 16 Bar
- Abrasion and wear resistance
- Compatible with Citroën LHM oil
- Resistant to automotive fuels including E85, engine oils and coolants
- Resistant to all types of automotive and HGV fluids
- Specified inside diameter
- Sold by the metre, adjust your quantity to receive a single length.
(0 reviews)
12,90€ – 19,39€ Select options This product has multiple variants. The options may be chosen on the product page
Electric sleeve
Fireproof glass fibre sheath 600°C length 5m diameter 3 to 25mm for electrical harness
Fibreglass fireproof sheath:
- Resistant to over 600°C
- White colour
- High flexibility
- Easy to install
- Non-friable, can be used like braided sleeving
- Diameter from 3 to 25mm
- Sold in 5M lengths
(0 reviews)
9,39€ – 31,89€ Select options This product has multiple variants. The options may be chosen on the product page

Register

Already have an account? Login

Register

Already have an account? Login

Tap + M4 tungsten carbide reinforced dies 0.5 / 0.7 pitch

Reinforced M4 tap and die set:

Choice of pitches 0.5 / 0.7

Taps + dies in M4 diameters with 0.5 and 0.7 pitch

Tungsten carbide tap + die set for threading very hard steel, cast iron and high-alloy carbon steel types

External coating treated with brazed carbide

Technical specifications:

Widely used in industry and machining

Sold as a set of 1 tap + 1 die

You may also like…

Black heat-shrink tubing 2:1, diameter 3 to 25mm Length 5 metres

Black heat-shrink tubing:

Sold in lengths of 5 metres

Flexible hose for cooling circuit, engine oil, LHM 10 to 19mm Length 1 metre

10 to 16mm flexible hose:

Specified inside diameter

Sold by the metre, adjust your quantity to receive a single length.

Fireproof glass fibre sheath 600°C length 5m diameter 3 to 25mm for electrical harness

Fibreglass fireproof sheath:

Sold in 5M lengths

Widely used in bodywork

To be crimped with special pliers

Sold with accessories from M3 to M8

Choice of pitches 0.5 / 0.75 / 1.0 / 1.25

Login

New to site? Create an Account

Register

Already have an account? Login

Login

New to site? Create an Account

Register

Already have an account? Login

Tap + M4 tungsten carbide reinforced dies 0.5 / 0.7 pitch

Reinforced M4 tap and die set:

Choice of pitches 0.5 / 0.7

Taps + dies in M4 diameters with 0.5 and 0.7 pitch

Tungsten carbide tap + die set for threading very hard steel, cast iron and high-alloy carbon steel types

External coating treated with brazed carbide

Technical specifications:

Widely used in industry and machining

Sold as a set of 1 tap + 1 die

You may also like…

Black heat-shrink tubing 2:1, diameter 3 to 25mm Length 5 metres

Black heat-shrink tubing:

Sold in lengths of 5 metres

Flexible hose for cooling circuit, engine oil, LHM 10 to 19mm Length 1 metre

10 to 16mm flexible hose:

Specified inside diameter

Sold by the metre, adjust your quantity to receive a single length.

Fireproof glass fibre sheath 600°C length 5m diameter 3 to 25mm for electrical harness

Fibreglass fireproof sheath:

Sold in 5M lengths

Reinforced tungsten carbide drill bit diameter 8mm

Reinforced depointer bit 8mm:

Widely used in bodywork

Aluminium crimp inserts, M3, M4, M5, M6, M8 Case 100 pcs.

Crimp inserts 100 pcs:

To be crimped with special pliers

Pliers for M3 to M8 crimp inserts

Pliers for crimping inserts:

Sold with accessories from M3 to M8

Tap + M8 tungsten carbide reinforced dies 0.5 / 0.75 / 1.0 / 1.25 pitch

Reinforced M8 tap and die set:

Choice of pitches 0.5 / 0.75 / 1.0 / 1.25