Shop
Showing 589–600 of 732 resultsSorted by popularity
-
AN FittingsDash 6 watertight bulkhead connector
Dash 6 bulkhead fitting:
- Internal diameter: 9.56mm.
- Thread JIC 9/16″ – 18 UNF.
- Black anodised finish.
-
Suitable for all types of hydrocarbons.
(0 reviews) -
AN FittingsDash 10 black air vent check valve
Dash 10 non-return valve:
- Internal diameter: 15.9mm.
- JIC 7/8″ – 14 UNF thread.
- Black anodised finish.
-
Suitable for all types of hydrocarbons.
(0 reviews) -
AN FittingsFitting dash 6 male male ORB 6 black
Dash 6 male male fitting:
- Inside diameter: 6 mm
- Thread JIC 9/16″ – 18 UNF
- Suitable for all types of hydrocarbons
- Reusable
- CNC machined aluminium + laser engraving
- Black anodised
-
Dash 6 / ORB 6 with seal
(0 reviews) -
Switches and switch padsCircuit breaker 24 volts High power 300 amps
24-volt high-power circuit breaker:
- Voltage range: 0 to 30V
- Mechanical contact
- 2 power poles
-
Maximum voltage: 300 amps
(0 reviews) -
Paint gunDA PRO Violet paint spray gun 1.3mm nozzle for paints and varnishes
DA pro Violet paint spray gun, for painters and bodywork specialists.
- Operating pressure: 1 to 10 bar
- Adjustable paint flow
- Adjustable air flow from 190 to 250ml/minute
- Adjustable output beam opening from 210 to 400mm
- Fully solvent cleanable
- 1.7mm nozzle
- Jar capacity: 600ml
- 1/4″ air hose connection
- Excellent results with water-based paints and direct glosses.
- Perfect finish with varnishes.
- Fine atomisation.
- 1.3mm nozzle.
-
Suitable for solvent-based and solvent-free paints.
(0 reviews) -
Glues and epoxyTwo-component epoxy adhesive gun with 10/1 ratio plunger
Epoxy adhesive application gun:
- High manufacturing quality
- 10/1 plunger
- Metal grip
- Chemical-resistant
-
For two-component 10/1 epoxy adhesives
(0 reviews) -
Drills, Taps and InsertsTap + M4 tungsten carbide reinforced dies 0.5 / 0.7 pitch
Reinforced M4 tap and die set:
- Tungsten carbide
- External coating treated with brazed carbide
- For threading steels with a grade greater than 65° (hard stainless steels, high-alloy steels)
- Sold individually (1 tap + 1 die)
-
Choice of pitches 0.5 / 0.7
(0 reviews)21,90€ Select options This product has multiple variants. The options may be chosen on the product page -
Fuel pumps, filters and regulatorsPetrol filter + petrol tap 8mm for motorbikes, vintage cars, agricultural machinery
Petrol filter + tap:
- 100 micron filtration
- Paper inner filter
- Low pressure drop
- 8mm connections
- Aluminium body
-
Compatible with petrol, diesel and E85
(0 reviews) -
Fuel pumps, filters and regulatorsUniversal petrol pump 12V Petrol, Diesel flow 140 l/h
External petrol pump:
- Flow rate: 140 litres / Hours
- Maximum pressure: 3 bars
- Weight: 450 grams
- Maximum engine power: 200 hp
- Total length: 125mm
- Suction diameter: 12mm
- Outlet diameter: 8mm
- Operating voltage: 6 to 18V
- Power consumption: 15 amps
- Compatible with Ethanol E85
- Compatible with petrol and diesel
-
Supplied with a fine sieve filter
(0 reviews) -
Fuel pumps, filters and regulatorsHigh flow petrol filter 500 l/h 8mm 100 microns compatible with Ethanol E85 and Diesel
8mm diameter high flow petrol filter:
- 100 micron filtration
- Internal bronze sieve filter
- Flow rate: 500 litres / Hour
- Low pressure drop
- Fittings with 8mm screwed ends
- CNC machined and anodised aluminium body
- Length: 160mm
- Diameter: 50mm
-
Compatible with petrol, diesel and E85
(0 reviews) -
Fuel pumps, filters and regulatorsAN8 Dash 8 100 micron 500 l/h high flow petrol filter compatible with Ethanol E85 and Diesel
Dash 8 high-flow petrol filter:
- 100 micron filtration
- Internal bronze sieve filter
- Flow rate: 500 litres / Hour
- Low pressure drop
- Dash 8 screwed connections
- CNC machined and anodised aluminium body
- Length: 160mm
- Diameter: 50mm
-
Compatible with petrol, diesel and E85
(0 reviews) -
Fuel pumps, filters and regulatorsAN6 Dash 6 100 micron 500 l/h high flow petrol filter compatible with Ethanol E85 and Diesel
Dash 6 high flow petrol filter:
- 100 micron filtration
- Internal bronze sieve filter
- Flow rate: 500 litres / Hour
- Low pressure drop
- Dash 6 screwed connections
- CNC machined and anodised aluminium body
- Length: 160mm
- Diameter: 50mm
-
Compatible with petrol, diesel and E85
(0 reviews)
